Waeco CF-60 Manuel d'instructions télécharger pdf (Page 20)

CoolFreeze

➤ Take out the contents of the cooling device.

➤ If necessary, place them in another cooling device to keep them

cool.

➤ Switch off the device.

➤ Leave the cover open.

➤ Wipe off the defrosted water.

6.10 Replacing the device fuse (240V)

Only CF-35, CF-40, CF-50, CF-60

Caution – Danger of electrocution!

Disconnect the connection cable before you replace the device fuse.

➤ Pull off the connection cable.

➤ Pry out the fuse insert (Fig. 6 2, page 5) with a screwdriver.

➤ Replace the defective fuse with a new one that has the same

rating (T4,0AL 250V).

➤ Press the fuse insert back into the housing.

6.11 Replacing the plug fuse (12/24 V)

➤ Pull the adapter sleeve (Fig. 9 4, page 6) off of the plug.

➤ Unscrew the screw (Fig. 9 5, page 6) out of the upper half of the

housing (Fig. 9 1, page 6).

➤ Carefully raise the upper half of the housing from the lower

(Fig. 9 6, page 6) half.

➤ Take out the contact pin (Fig. 9 3, page 6).

➤ Replace the defective fuse (Fig. 9 2, page 6) with a new one that

has the same rating (8A 32V).

➤ Re-assemble the plug in the reverse order.

CF18-60_M_81003:PowerVac_PV-100 3/9/08 3:53 PM Page 21

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27

Pas de commentaire

Waeco CF-60 Manuel d'instructions Page 20