Waeco CF 40 Manuel d'instructions télécharger pdf (Page 38)

Operation

6.10 Replacing the plug fuse (12/24 V)

➤ Pull the adapter sleeve (fig. 7 4, page 5) off of the plug.

➤ Unscrew the screw (fig. 7 5, page 5) out of the upper half of

the housing (fig. 7 1, page 5).

➤ Carefully raise the upper half of the housing from the lower

(fig. 7 6, page 5) half.

➤ Take out the contact pin (fig. 7 3, page 5).

➤ Replace the defective fuse (fig. 7 2, page 5) with a new one

that has the same rating (8A 32V).

➤ Re-assemble the plug in the reverse order.

6.11 Replacing the light bulb

➤ Press the switch pin (fig. 8 2, page 5) downwards so that the

transparent part (fig. 8 1, page 5) of the lamp can be removed

at the front.

➤ Replace the light bulb.

Note

The LEDs in the light bulb must be aligned with the transparent part

of the lamp.

➤ Press the transparent part of the lamp back into the housing.

_CF-35_60.book Seite 38 Mittwoch, 8. Februar 2012 3:36 15

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 187 188

Pas de commentaire

Waeco CF 40 Manuel d'instructions Page 38